UNIVERSAL PORT-This port is for connecting the component with the Universal Port option such as UP-A1 Dock
IR IN/OUT-A commercially available IR receiver can be connected to the IR IN jack, allowing you to control the AV controller while you’re in Zone 2/3, or control it when it’s out of sight, for example, installed in a cabinet.
A commercially available IR emitter can be connected to the IR OUT jack to pass IR (infrared) remote control signals through to other components.
DIGITAL OPTICAL IN 1, 2, and 3-These optical digital audio inputs are for connecting components with optical digital audio outputs, such as CD and DVD/BD players. They’re assignable, which means you can assign each one to an input selector to suit your setup.
DIGITAL COAXIAL IN 1, 2, and 3 These coaxial digital audio inputs are for connecting components with coaxial digital audio outputs, such as CD and DVD/BD players. They’re assignable, which means you can assign each one to an input selector to suit your setup.
USB port-A USB mass storage device, such as a USB flash drive or MP3 player, containing music files can be plugged in here and the music selected can be played through the AV controller
ETHERNET-This port is for connecting the AV controller to your Ethernet network (e.g., router or switch) for playing music files on a networked computer or media server, or for listening to Internet radio.
RI REMOTE CONTROL This RI (Remote Interactive) jack can be connected to an RI jack on another Onkyo AV component. The AV controller’s remote controller can then be used to control that component. To use RI, you must make an analog audio connection (RCA) between the AV controller and the other AV component, even if they are connected digitally.
RS232-Terminal for control
HDMI IN 1–7, OUT MAIN, and OUT SUB-HDMI (High Definition Multimedia Interface) connections carry digital audio and digital video. The HDMI inputs are for connecting components with an HDMI output, such as a DVD player, Bluray Disc Player, DVD recorder, or DVR (digital video recorder). They’re assignable, which means you can assign each one to an input selector to suit your setup. The HDMI outputs are for connecting a TV or projector with an HDMI input.
MONITOR OUT-These S-Video and composite video jacks should be connected to a video input on your TV or projector
COMPONENT VIDEO IN 1, 2 and 3-These RCA component video inputs are for connecting components with a component video output, such as a DVD player, DVD recorder, or DVR (digital video recorder). They’re assignable, which means you can assign each one to an input selector to suit your setup.
COMPONENT VIDEO MONITOR OUT-These RCA component video outputs are for connecting a TV or projector with a component video input.
COMPONENT VIDEO ZONE 2 OUT-This RCA component video output is for connecting a TV or projector with a component video input located in your main listening room or Zone 2.
ZONE 2 OUT-This composite video output can be connected to a video input on a TV in Zone 2.
PC INPUT ANALOG RGB-This input terminal is for connecting a personal computer with an analog RGB output. You can assign it to an input selector to suit your setup.
FM ANTENNA-This jack is for connecting an FM antenna AM ANTENNA-These push terminals are for connecting an AM antenna
AC INLET-The supplied power cord is connected here. The other end of the power cord should be connected to a suitable wall outlet.
GND screw-This screw is for connecting a turntable’s ground wire
PHONO IN-These analog audio inputs are for connecting a turntable
BALANCE L/R INPUT-This balanced XLR input is for connecting a component with a stereo balanced XLR output. For a mono source, connect to the BALANCE L XLR.
CD IN-These analog audio inputs are for connecting a CD player’s analog audio output.
12V TRIGGER OUT (A/B/C)-These outputs can be connected to the 12-volt trigger inputs on other components
TV/TAPE IN/OUT-These analog audio inputs and outputs are for connecting a TV or recorder with an analog audio input-and output (cassette, Mini Disc, etc.)
AUX 2 IN-This analog audio input is for connecting an analog audio output, such as an audio device, etc.
GAME IN-Here you can connect a game console, etc. Input jacks include S-Video, composite video, and analog audio
CBL/SAT IN-Here you can connect a cable/satellite receiver, set top box, etc. Input jacks include S-Video, composite video, and analog audio.
VCR/DVR IN/OUT-Here you can connect a VCR or DVR (digital video recorder). Input and output jacks include S-Video, composite video, and analog audio.
DVD/BD IN-Here you can connect a DVD/BD player. Input jacks include S-Video, composite video, and analog audio. You can connect a DVD/BD player’s 2-channel analog audio output.
MULTI CH input: FRONT L/R, CENTER, SUBWOOFER, SURR L/R, and SURR BACK L/R-This analog multichannel input is for connecting a component with a 5.1/7.1-channel analog audio output, such as a DVD player, DVD-Audio or Super Audio CD-capable player, or an MPEG decoder.
PRE OUT: FRONT L/R, CENTER, SURR L/R, SURR BACK L/R, and FRONT HIGH/WIDE L/R-These multichannel analog audio outputs can be connected to the analog audio input on a multichannel power amplifier.
PRE OUT: SW1, SW2-These analog audio outputs can be connected to a powered subwoofer. You can connect the powered subwoofer with each jacks respectively. Level and distance can be set individually for each output.
PRE OUT: ZONE 2, ZONE 3-These analog audio outputs can be connected to the line inputs on amplifiers in Zone 2 and Zone 3. The SW jacks can be connected to the inputs on powered subwoofers in Zone 2 and Zone 3.
PRE OUT: FRONT L/R, CENTER, SUBWOOFER 1/2, SURR L/R, SURR BACK L/R, and FRONT HIGH/WIDE L/R-These balanced XLR outputs are for connecting a multichannel power amplifier and powered subwoofer. The FRONT L/R and SURR BACK L/R outputs can be used with front speakers and surround back speakers, respectively, or used to bi-amp the front speakers.
SIRIUS antenna-(North American models) This jack is for connecting a SIRIUS Satellite Radio antenna, sold separately
Comments
0 comments
Article is closed for comments.