TX-RZ1100 - Network Connection

Set up Wi-Fi connection with an access point such as a wireless LAN router.

There are the following two methods of connecting by Wi-Fi:

"Scan Networks": Search for an access point from this unit. Find out the SSID of the access point beforehand.

"Use iOS Device (iOS7 or later)": Share the iOS device's Wi-Fi settings with this unit.

If you select "Scan Networks", there are a further two choices of connection method. Check the following.

"Enter Password": Enter the password (or key) of the access point to connect.

"Push Button": If the access point has an automatic connection button, you can connect without entering a password.

• If the SSID of the access point is not displayed, then in the screen listing the SSIDs, select "Other..." with the cursor on the remote controller and press ENTER, then follow the onscreen instructions.

Keyboard input

To switch between upper and lower case, select "A/a" on the screen and press ENTER. To select whether to mask the password with "＊" or display it in plain text, press MEMORY on the remote controller.

Pressing CLR will delete all the input characters.

• A confirmation screen asking you to agree to the privacy policy is displayed during network setting.
• Select "Yes" and press ENTER to indicate agreement.