TX-RZ1100 - Troubleshooting: Multi-Zone

Cannot ZONE output audio of external AV component

Depending on the model, input by HDMI cable may not be supported. 

The audio from externally connected AV components can only be output when the audio is analog or 2ch
PCM audio signals.

• If you have connected the AV component to this unit with a digital optical/coaxial cable, the audio output of the AV component needs to be set to PCM.

Others

• Settings are required in Initial Setup, "Multi Zone Setup" to use the multi-zone feature. Check in "Initial Setup" in the Basic Manual.
• If the audio signal is from the NET input selector, zone output is not possible for DSD and Dolby TrueHD audio signals.