A-5VL Back Panel

Ground Screw-This screw is for connecting a turntable's ground wire
Phono (MM/MC) Jacks-Connect a turntable's audio output terminals into these jacks
CD Jacks-Connect a CD player's audio output terminals into these jacks
Tuner Jacks-Connect a tuner's audio output terminals into these jacks
Tape In/Out-Connect a cassette, MiniDisc Recorder, or other recording device to these jacks
Dock-Connect an Onkyo RI dock for the iPod here
RI Remote Control-Connect an Onkyo product with an plug (RI dock or tuner) here to link it to the amplifier
Audio Input Digital 1 Coaxial-Connect a digital audio input here. This is for connecting a digital playback device
Audio Input Digital 2 Coaxial-Connect a digital audio input here. This is for connecting a digital playback device
Speakers A-These terminal posts are for connecting speakers A
Speakers B-These terminal posts are for connecting speakers B
AC Inlet-The supplied power cord should be connected here
MM/MC Selector-Set this selector to the turntable's cartridge format (MM /MC )

Please Note

Just connecting the cord will not link the connected device. Be sure to connect the audio cables as well.

!CAUTION!

Do not connect devices other than turntables to the PHONO inputs
Remove the short pins plugged into the jacks before connecting a turntable to the PHONO inputs
Switch to MM when using a high-output MC cartridge.

For instructions on how to connect to specific devices, please use the links below: