A-5VL-Connecting a Digital Component (Coaxial)

Please read the following to connect a digital component to the A-5VL Integrated Amplifier. 

Please Note

• The unit supports 16/24 bit, 32/44.1/48/96 kHz PCM signal digital input
• Inputting an incompatible signal may result in noise
• When an unsupported signal is detected, the unit's LOCKED indicator illuminates
• Do not input a DTS-CD digital audio signal

If there is no audio when connecting this unit to a digital component:

• Make sure that the cables are connected correctly.
• Make sure that none of the cables are kinked or damaged.
• Make sure that the digital audio signal's format is supported.
• Make sure that the input device is selected correctly. 
• If the muting indicator is lighted up, cancel mute mode by pressing the muting button on the remote controller.

If there is distortion or noise in the audio:

• Do not bundle audio cables with power cords and the like, because doing so may
  degrade audio performance.
• An audio cable may be picking up interference. Try repositioning your cables.